TECHNICAL SPECIFICATION OF THE OBJECT - LUX PACKAGE

  • Square welded pipes EN10219-2 cross section 100/100/4 mm
    - from continuously cast material
    - non-lubricated, covered only by emulsion
    - with the exterior lid removed
    - certified with EN 10204 / 2.2.
  • Roof and wall panels FTP with PIR fill that is especially suitable for building construction that requires high standards of thermal insulation, hygienic conditions and sound reduction. They offer basic fire protection. The panels consist of two steel galvanized and colored sheets and constructive insulation of non-combustible PIR foam. All three layers are connected and form a complex element.
  • Aluminum joinery and aluminum windows are plasticised. Aluminum plasticization allows dyeing in any color according to the RAL map. During plasticization, the profile firstly must be well cleaned. After cleaning, they are dyed in the desired color with an electrostatic gun using a powder color and eventually dried in a furnace at 180 ° C. By plasticisation, we achieve greater resistance to physical influences that can lead to the damage of the profile itself. Aluminum joinery is an important and creative part of the facade which, with its size and shape, beautifies the very appearance of the building. In order to make windows functional, they must enable us a high quality ventilation, to give the space enough natural light and they must protect us from the outside environment that surrounds us. Products have been tested and certified by several internationally recognized laboratories and institutes.
  • Thermal insulation Thermal insulation
    - Provides a pleasant temperature in the interior of the building both in winter and in summer (regardless of whether it is outside +40 or -15 degrees of Celsius), the temperature inside the room is constant
    - Allows object to breathe, i.e. the steam that creates inside passes smoothly through the facade structure;
    - Prevent creation of moisture, condensation and mold;
    - Gives mechanical protection to the building, prolonging its lifetime
    - Ensures energy efficiency of the building - reduces energy consumption for heating and cooling and thus saves your money and saves the environment;
    - Creates healthy microclimate for your pleasant stay and your family inside the premises;
  • Linings of the wall and the ceiling are made of univera which is a standard panel for the arrangement of our interior. Standard panel is available in 5 combinations of decor and structure.
    - Authentic surface structures;
    - Optimal surface layer characteristics (abrasion and scratch resistance) according to EN14322;
  • Partition walls
    - The walls are made of a single steel grid and a double coating from double plaster-cardboard moisture-resistant plates.
    - placing plasterboard panels on the walls;
    - installation of substructures from UD and CD profiles to ceilings and plasterboardswith a thickness of 2 x 12.5 mm per ceilings;
  • Electrical installation in the building, with appropriate number of lighting places - in individual rooms up to 12 m2 in size, one switch and bulb, kitchen and dining room are treated as one room and the living room as the other, regardless of whether they are connected into one whole;
    - single-phase sockets - in each room individually one to the surface up to 4 m2 (eg, 9 m2 - three corresponding sockets);
    - three-phase socket - one in the kitchen;
    - antenna outlet - in the room one and one in the living room;
    - phone outlet - one (eg in the living room);
    - outlet outside the facility - one socket located somewhere on the wall of the building and two lighting spots on the building itself, plus bells at the entrance door
    - placing the board with the appropriate fuse number, the power cable to the electric shaft is not included in the price of the facility
    - the installation ends with the installation of a switchboard with fuses,
  • Rough Installation of plumbing and sewage network in the facility at the designated points with the execution of plumbing and sewerage network on one meter outside the building.
    - Fine installation for sanitary facilities (toilet, toilet seat and cistern, bathroom sink, basin pedestal and faucet, shower cubicle with doors).
    - placement of ceramic tiles at designated places for it (bathroom);
  • Floor lining.Compared to other floor coverings, the floors we apply are extremely quiet and function as a heat insulator, creating a very comfortable atmosphere. Our floors are available in different designs, so they can fit well into the most diverse styles .
  • Central Air Conditioning - features an efficient system that offers exceptional energy savings, simple and easy installation, and connection to different types of indoor units, making design and system setup simpler.
    Mitsubishi Electric system that will be applied, is a unique solution for both - cooling and the heating sector. Mitsubishi Electric VRF system, that doesn’t take any space, with minimal energy costs, provides heating with twice lower costs than heating on the gas does. This system is a state-of-the-art technology that can be used to condition the living space, while controlling of internal units can be done through a single control system. The system can be connected to the Internet and programmed even when no one is in the room.
  • A ‘smart home’ is an object equipped with state-of-the-art technology that allows you to feel with maximum comfort and achieve significant savings in energy consumption. The essence of the Smart House system is to enable you to easily manage all systems that are automatically adapted to your needs and habits. To feel safe, means to be free ... The KNX technology of the "smart home" has enabled the integration of all different security systems into one communication system. The system informs you about events, but also takes certain measures to prevent or minimize potential hazards. By applying the "smart home" system, the security of your facility is upgraded to a higher level, and you (as an user) have the maximum benefit of using this system in everyday life.
    - Technical alarms (fire alarm...)
    - Against the burglary (alarm) system
    - Video intercom and access control
  • Protection from the sun.By combining the lamellas of various shapes, brusoleum are formed as an effective thermal protection of the light faces of the front facade.
    Brusoleum provides even distribution of sunlight in the rooms and prevents heat accumulation. Depending on the shape of the blades, the blades can be positioned at various angles (usually 25, 30 and 45), while the battens can be positioned vertically and horizontally. The brushed structures allow moving or rotating of the Brusolees. Brusolees are embedded in all colors according to the RAL map in accordance with the selected façade joinery.

TECHNICAL SPECIFICATION OF THE OBJECT - ECONOMIC PACKAGE

  • Square welded pipes EN10219-2 cross section 100/100/4 mm
    - from continuously cast material
    - non-lubricated, covered only by emulsion
    - with the exterior lid removed
    - certified with EN 10204 / 2.2.
  • Roof and wall panels FTP with PIR fill that is especially suitable for building construction that requires high standards of thermal insulation, hygienic conditions and sound reduction. They offer basic fire protection. The panels consist of two steel galvanized and colored sheets and constructive insulation of non-combustible PIR foam. All three layers are connected and form a complex element.
  • Aluminum joinery and aluminum windows are plasticised. Aluminum plasticization allows dyeing in any color according to the RAL map. During plasticization, the profile firstly must be well cleaned. After cleaning, they are dyed in the desired color with an electrostatic gun using a powder color and eventually dried in a furnace at 180 ° C. By plasticisation, we achieve greater resistance to physical influences that can lead to the damage of the profile itself. Aluminum joinery is an important and creative part of the facade which, with its size and shape, beautifies the very appearance of the building. In order to make windows functional, they must enable us a high quality ventilation, to give the space enough natural light and they must protect us from the outside environment that surrounds us. Products have been tested and certified by several internationally recognized laboratories and institutes.
  • Thermal insulation is an additional indispensable element of the building. Thermal insulation has the following characteristics:
    - Provides a pleasant temperature in the interior of the building both in winter and in summer (regardless of whether it is outside +40 or -15 degrees of Celsius), the temperature inside the room is constant
    - Allows object to breathe, i.e. the steam that creates inside passes smoothly through the facade structure;
    - Prevent creation of moisture, condensation and mold;
    - Gives mechanical protection to the building, prolonging its lifetime
    - Ensures energy efficiency of the building - reduces energy consumption for heating and cooling and thus saves your money and saves the environment;
    - Creates healthy microclimate for your pleasant stay and your family inside the premises;
  • Linings of the wall and the ceiling are made of univera which is a standard panel for the arrangement of our interior. Standard panel is available in 5 combinations of decor and structure.
    - Authentic surface structures;
    - Optimal surface layer characteristics (abrasion and scratch resistance) according to EN14322;
  • Partition walls
    - he walls are made of a single steel grid and a double coating from double plaster-cardboard moisture-resistant plates.
    - placing plasterboard panels on the walls;
    - installation of substructures from UD and CD profiles to ceilings and plasterboardswith a thickness of 2 x 12.5 mm per ceilings;
  • Electrical installation in the buildingwith appropriate number of lighting places - in individual rooms up to 12 m2 in size, one switch and bulb, kitchen and dining room are treated as one room and the living room as the other, regardless of whether they are connected into one whole;
    - single-phase sockets - in each room individually one to the surface up to 4 m2 (eg, 9 m2 - three corresponding sockets);
    - three-phase socket - one in the kitchen;
    - antenna outlet - in the room one and one in the living room;
    - phone outlet - one (eg in the living room);
    - outlet outside the facility - one socket located somewhere on the wall of the building and two lighting spots on the building itself, plus bells at the entrance door
    - placing the board with the appropriate fuse number, the power cable to the electric shaft is not included in the price of the facility
    - the installation ends with the installation of a switchboard with fuses
  • Rough Installation of plumbing and sewage network in the facility at the designated points with the execution of plumbing and sewerage network on one meter outside the building.
    - Fine installation for sanitary facilities (toilet, toilet seat and cistern, bathroom sink, basin pedestal and faucet, shower cubicle with doors).
    - placement of ceramic tiles at designated places for it (bathroom);
  • Floor lining.Compared to other floor coverings, the floors we apply are extremely quiet and function as a heat insulator, creating a very comfortable atmosphere. Our floors are available in different designs, so they can fit well into the most diverse styles .
  • Air conditioning. High energy class air conditioning: A / A, with ecological R410A freon. The device has the function of registering the loss of the working medium (it registers the lack of gas in the system and automatically switches off the device to protect the compressor). The air conditioner is equipped with an advanced self-diagnostic and automatic protection system, and the internal unit is a new version of the modern panel in white with signal LEDs and a display in the center that discreetly sparkles white under the panel.
    Characteristics:
    - Cold catalyst filter (eliminates formaldehyde and other organic matter, as well as harmful gases and odors)
    - Freon loss detector • Auto-diagnostics and automatic protection
    - Auto restart
    - Basic information:
    - Cooling capacity: 9,000BTU
    - Cooling capacity: 2.64kW
    - Heating capacity: 9.500 BTU
    - Heating capacity: 2.78kW
    - Consumption (cooling / heating): 820 / 770W
    - Working medium: R410A
    - Energy class: A / A
    - EER / COP: 3.21 / 3.61
    - Temperature range: -7 ° C to + 43 ° C
    - Sound pressure - un. Ed .: 41/33/29 dB (A) / Outdoors: 55dB (A)
    - Sound pressure - un. Ed .: 41/33/29 dB (A) / Outdoors: 55dB (A)
    - Dimensions, net:
    - Indoor unit (WxHxD): 715x250x188mm
    - Outdoor unit (WxHxD): 700x540x240mm
    - Weight, net:
    - Indoor unit: 6.5 kg
    - Outdoor unit: 24.5 kg
    - Garantni rok: 2 godine, uz mogućnost produžetka do 5 godina, uz redovne godišnje servise koji ne ulaze u cenu uređaja ili montaže.

    - Noise level 46/56 db (A)
  • Protection from the sun. By combining the lamellas of various shapes, brusoleum are formed as an effective thermal protection of the light faces of the front facade.
    Brusoleum provides even distribution of sunlight in the rooms and prevents heat accumulation. Depending on the shape of the blades, the blades can be positioned at various angles (usually 25, 30 and 45), while the battens can be positioned vertically and horizontally. The brushed structures allow moving or rotating of the Brusolees. Brusolees are embedded in all colors according to the RAL map in accordance with the selected façade joinery.

Depending on the location, it is necessary to prepare the terrain before installing the facility. It is necessary to remove the humus layer of soil in a thickness of about 30cm, and if necessary more. The excavated soil is replaced by crushed stone. The filling is done in two layers in a thickness of 15-20cm, pressed to full and uniform compaction.


Before the object assembling, it is needed to check the compactness and the constellation module should be movable approximately within the limits of Mv = 30-40MPa.


The construction may be under mild or powerful wind innluence, depending on the object’s location, the configuration of the surrounding terrain, etc., and the basic wind speeds that can be achieved at a specific location. Bearing this in mind, there is a need for securing an object if the total wind force is greater than the minimum weight of the object in exploitation. In these cases, the production of reinforced concrete foundations of the appropriate dimensions must be foreseen, so that the total minimum weight of the object in the exploitation and the weight of the foundation give sufficient safety to the sweeping and slipping of the objects.